Filter
Top Products
Page 2 For technical questions, please call 1-800-444-3353. SKU 92880
Save This Manual
Keep this manual for the safety warnings
and precautions, assembly, operating, inspection,
maintenance and cleaning procedures. Write the
product’s serial number in the back of the manual
near the assembly diagram (or month and year of
purchase if product has no number). Keep this
manual and the receipt in a safe and dry place for
future reference.
Important SAFETY Information
In this manual, on the labeling, and all
other information provided with this
product:
This is the safety alert symbol. It
is used to alert you to potential
personal injury hazards. Obey
all safety messages that follow
this symbol to avoid possible
injury or death.
DANGER indicates a
hazardous situation
which, if not avoided,
will result in death or serious injury.
WARNING indicates a
hazardous situation
which, if not avoided,
could result in death or serious
injury.
CAUTION, used with the
safety alert symbol,
indicates a hazardous
situation which, if not avoided,
could result in minor or moderate
injury.
NOTICE is used to
address practices not
related to personal
injury.
CAUTION, without the
safety alert symbol, is
used to address
practices not related to personal
injury.
General Power Tool Safety Warnings
WARNING Read all safety warnings
and instructions. Failure to follow the
warnings and instructions may result
in electric shock, re and/or serious
injury.
Save all warnings and instructions
for future reference.
The term ″power tool″ in the warnings
refers to your mains-operated (corded)
power tool or battery-operated
(cordless) power tool.
Work area safety1.
Keep work area clean and well lit. a.
Cluttered or dark areas invite accidents.
Do not operate power tools in b.
explosive atmospheres, such as in the
presence of ammable liquids, gases
or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders c.
away while operating a power tool.
Distractions can cause you to lose
control.
Electrical safety2.
The Transformer plug must match the a.
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with the Transformer. Unmodied
plugs and matching outlets will reduce
risk of electric shock.
Do not expose power tools to rain or b.
wet conditions. Water entering a power
tool will increase the risk of electric
shock.
Do not abuse the cord. Never use c.
the cord for carrying, pulling or
unplugging the Transformer or
Charger Base. Keep cord away from
heat, oil, sharp edges or moving
parts. Damaged or entangled cords
increase the risk of electric shock.
REV 10e