Filter
Top Products
Page 10 For technical questions, please call 1-800-444-3353. SKU 93632
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
Tool Set Up -
Installing Drill Bits
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Trigger of the tool to its
“OFF” position and unplug the
tool from its electrical outlet
before assembling or making any
adjustments to the tool.
Drill Bits (not included) come in various 1.
sizes and types. Various types include
low and high speed twist bits for metals,
spade or brad point bits for wood, forst-
or plastic, auger bits for boring through
and dry wall, etc. Select the appropriate
drill bit.
Unplug the tool.2.
By hand, rotate the outer ring of the 3.
Chuck counterclockwise to open it
enough to allow the bit to be inserted.
Use the Chuck Key if needed. Insert the
bit fully into the Chuck jaws and center it.
By hand, rotate the outer ring of the 4.
Chuck clockwise to tighten on the bit.
Make sure the bit is still centered in the
Chuck.
Insert the tip of the Chuck Key into one 5.
of the openings drilled into the side of the
Chuck. Engage the gears of the Chuck
Key with the gear teeth on the outside
of the Chuck. Turn the Chuck Key clock-
wise to tighten the jaws of the Chuck
CAUTION: Make sure the drill bit is centered
-
ginning work.