Filter
Top Products
Page 12 For technical questions, please call 1-800-444-3353. SKU 93632
MAINTENANCE AND
INSPECTION
The Armature (25) and Stator (29) 1.
comprise the main part of the tool.
Protect these electrical components from
moisture or oil intrusion.
Inspect the Carbon Brushes (34) 2.
regularly. Replace them is they are more
than 1/3 worn or are chipped or cracked.
When handling them, be careful not
to damage them. To reduce wear after
inspection, replace them in exactly the
same way as they were removed.
Regularly inspect all components and 3.
fasteners to be sure they are properly
installed, not damaged, and tight. Tighten
any loose parts. Repair or replace any
damaged components.
If the tool is damaged or does not 4.
service technician.
Clean the tool after each use, and 5.
store it properly. Keep it out of reach of
children and other unauthorized persons.
Protect it from moisture and corrosive
materials.