Filter
Top Products
Page 18SKU 90891 For technical questions, please call 1-800-444-3353.
To Adjust The Miter Angle:
WARNING! Prior to performing this procedure, make sure the Power Cord of the
Miter Saw is unplugged from its electrical outlet.
FASTEN KNOB (104)
SCALE PLATE
(141)
TURN BASE
(125)
GUIDE FENCE (105)
FIGURE N
Knob (74)
The miter angle of a cut may be adjusted 0 - 45 degrees to the right or left. To do
so, loosen the Fasten Knob (104) located on the Guide Fence (105).
(See Figure N.)
Move the Turn Base (125) to the right or left until the desired miter angle of cut is
indicated by the Scale Plate (141). Then, retighten the Fasten Knob (104) to lock
the Miter Saw in place. (See Figure N.)
1.
2.