Filter
Top Products
Page 2SKU 90891 For technical questions, please call 1-800-444-3353.
REV 05i, 07h
SPECIFICATIONS
Electrical
Requirements
120 V / 60 Hz / 4600 RPM
10.8 A Input Working Amperage (with load)
1-3/4 HP Motor / Single Phase
2-Prong Power Plug
Double Insulated Motor w/ External Access Brushes
Arbor Diameter 5/8” (0.625”)
Positive Stops 0°, 15°, 22.5°, 30°, 45° Miter
0°, 45° Compound
Blade Diameter 10”, 60 Tooth, C2 Carbide Tipped Blade
Cutting Capacity At 90 Degrees: 3-1/2” Deep x 12” Front to Back
At 45 Degrees: 1-3/4” Deep x 10” Front to Back
Features Trigger Safety Button
Transparent, Retractable, Blade Guard
Accessories Workpiece Holders (Qty. 2)
Hex Socket Wrench (Qty. 1)
Bafe Plate (Qty. 1)
Bafe Plate Screw (Qty. 1)
Carbon Brushes (Qty. 2)
Dust Collect Bag (Qty. 1)
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside
of the front cover. Keep this manual and invoice in a safe and dry place for future refer-
ence.
GENERAL SAFETY RULES
WARNING! Read all instructions
Failure to follow all instructions listed below may result in electric shock,
re, and/or serious injury. The term “power tool” in all of the warnings listed
below refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
1.
E105017E105017