Filter
Top Products
If bladeISSQUAREtotable;
A. Checkpointer
If POINTERDOESNOTpointto the"0" markonthe
bevelscale;
B. Loosenscrewandadjustpointer... usingmedium
screwdriver.
If bladeisNOTSQUAREtotable..,the90° stopscrew
mustbeADJUSTED.
1. Unscrewg0° STOPSCREWthreeor fourturnsusing
3/16in.setscrewwrench.
2. Tilt bladesothatit issquarewithtable.
3. Screw90° stopscrewINuntilit stops... checkonce
againforsquarenessandreadjustscrew,if necessary.
4. CheckPOINTER... readjust, if necessary.
5. Tilt blade to 45 ° and adjust 45 ° STOP SCREW the
same way.
90 °
STOP SCREW 45°
STOP SCREW
HEAD OF
COMBINATION SQUARE
25