Filter
Top Products
UNPACKING AND CHECKING CONTENTS
TOOLS NEEDED
, P,iers @ @
Wrenches
:iii! ?ii: iii iiii:!iii i;l 3/8in. 7/16in.
1/2 in. 9/16 in.
Combination Square 3/4 in.
Model 113.24181 Motorized Table Saw isshipped complete
in one carton including Two Table Extensions and Steel
Legs.
Separate all parts from packing materials and check each
one with the illustration and the listof Loose Parts to make
certain all items are accounted for, before discarding any
packing material.
If any parts are missing, do not attemp to assemble the
table saw, plug in the power cord or turn the switch on
until the missing parts are obtained and are installed
correctly.
Remove the protective oil that is applied to the table top
and edges of the table. Use any ordinary household type
grease and spot remover.
CAUTION: Never use gasoline, naptha or similar highly
volatile solvents.
Apply a coat of automobile wax to the table.
Wipe all partsthoroughly with a clean, dry cloth.
WARNING: FOR YOUR OWN SAFETY, NEVER
CONNECT PLUG TO POWER SOURCE OUTLET UNTIL
ALL ASSEMBLY STEPS ARE COMPLETE, AND YOU
HAVE READ AND UNDERSTAND THE SAFETY AND
OPERATIONAL INSTRUCTIONS.
8
3
LiST OF LOOSE PARTS
6
Key
No. Part Name Qty.
1 Leg ...................................... 4
2 Stiffener .................................. 4
3 Table Extension ............................ 2
4 Blade Guard and Spreader .................... 1
5 Spreader Support ........................... 1
6 Miter Gauge ............................... 1
7 Rip Fence ................................ 1
8 Fence Guide Bar with Rip Scale (Front) ......... 1
9 Fence Guide Bar (Rear) ...................... 1
10 Guide Bar Rod ............................. 1
11 Arbor Nut Wrench .......................... 1
12 Arbor Wrench ............................. 1
13 Owners Manual ............................ 1
Pkg. of MiscellaneousSmall Parts No. 62596
Consisting of the Following:
14 Setscrew Wrench, 3/32 in .................. 1
14 Setscrew Wrench, 1/8 in................... 1
14 Setscrew Wrench, 5/32 in.................. 1
14 Setscrew Wrench, 3/16 in.................. 1
15 Switch Key ............................ 2
16 Self-Threading Nut ....................... 2
17 Hex Head Screw, 5/16 in.-18 x 1-1/2 in. long .. 2
17 Hex Head Screw, 5/16 in.-18 x 7/8 in. long ... 2
17 Hex Head Screw, 5/16 in.-18 x 5/8 in. long ... 16
17 Hex Head Screw, 1/4 in.-20 x 1/2 in. long .... 16
17 Hex Head Screw, 5/16in.-18x 1-1/4in. long .. 8
17 Hex Head Screw, 1/4 in.-20 x 5/8 in. long .... 2
18 Hex Nut, 5/16 in.--18
(approx. dia. of hole 5/16 in.) ............. 28
18 Hex Nut, 1/4 in.-20
(approx. dia. of hole 1/4 in.) .............. 18
18 Hex Nut, 1/2 in.-13
(approx. dia. of hole 1/2 in.) .............. 8
19 Lockwasher, 5/16 in. External Type
(approx. dia. of hole 5/16 in.) ............. 28
19 Lockwasher, 1/4 in. External Type
(approx. dia. of hole 1/4 in.) .............. 18
20 Guide Bar Spacer ........................ 2
21 Thumbscrew, 5/16 in.-18 x 1 in. long ........ 1
22 Leveling Foot ........................... 4
15 16
SIZE
T_ 18 19
//_ I/2 IN.
22