Filter
Top Products
REMOVINGBLADESFROMSAW(SeeFigs,12- 16)
1.Unplugthesawandallow blades to cool.
/'lk WARNING: Failure to unplugthe saw Couldresultin accidental starting I
causing possibleserious personal injury,
I
2, Rotate the blades untilthe holes in both blades are aligned. Then place pin
attached to the wrench through holes in blades. Unscrew Lock Nut
counterclockwise and remove (see Fig. 12),
3. Open the retractable guard (see Fig. 13).
4. Lift up and remove Blade "B" (see Fig. 14),
5. Remove the arbor adapter (see Fig. 15).
6. Lift up and remove Blade "A" (see Fig, 16).
Fig. 13
Retracted
Fig. 15
rbor
Adapter
Fig. 16
17