Filter
Top Products
ASSEMBUNG STEEL LEGS
1. From among the loose parts, find the following hard-
ware:
*24 Truss Head Screws, 1/4-20 x 1/2" long
*24 Lockwasher, 1/4 External
*24 Hex Nuts, 1/4-20
*8 Hex Nuts,318-16
*4 Leveling Feet
Items marked with an asterik (*) are shown actual size.
1/4-20 x 1/2 IN.
TRUSS HEAD SCREW
3/8 -16
HEX NUT
©
1/4 IN EXTERNAL
LOCKWASH ER
@
1/4-20
HEX NUT
LEVELING FOOT
2. Assemble the legs as shown.
Insert the Truss Head Screws throughthe holes inthe
legs, then through the holes inthe Stiffeners. MAKE
SURE THE SCREWS GO THROUGH THE HOLES
IN THE SIDE STIFFENERS MARKED "X".
3. Install the lockwasher, screw on the nuts but do not
tighten until completely assembled.
4. Install Leveling Feet.
ASSEMBLE SCREWS
THROUGH HOLES
MARKED "X"
SIDE STIFFENER
END
STIFFENER
\
HEX NUTS
_ LEVELING FOOT
MOUNTING SAW
1. From among the loose parts, find the following hard-
ware.
*4 Hex Head Screws, 5/16-18 x 1-1/4" long
*4 Hex Nuts, 5/16-18
*4 Lockwasher, 5/16 External Type
*8 Flat Washers, 11/32 x 11/16 x 1/16
Items marked with an astenl_(*) are shown actual size.
HEX HEAD SCREW
5/16 IN EXTERNAL
LOCKWASHER
5/16-18
HEX NUT
FLAT WASHER
11