Filter
Top Products
,_, WARNING: To avoid serious personal injury, always remove the battery
pack from the tool when cleaning or performing any maintenance.
WARNING: When servicing, use only identical Craftsman replacement parts.
Use of any other parts may create a hazard or cause product damage.
WARNING: It is not recommended to use compressed dry air to clean the
Auto-Hammer. If cleaning with compressed air is the only method to available,
always wear safety goggles or safety glasses with side shields when using
compressed air to clean the tool. If the operation is dusty, also wear a dust mask.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible
to damage from various types of commercial solvents and may be damaged by
their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING: Do not at any time let brake fluids, gasoline, petroleum-based
products, penetrating oils, etc. come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result in serious personal injury.
WARNING: When servicing, use only identical Craftsman replacement
parts. Use of any other parts may create a hazard or cause product damage.
To ensure safety and reliability, all repairs should be performed by a qualified
service technician at a Sears Service Center.
PROBLEM
The Auto-Hammer
does not work
CAUSE
Battery is depleted
The machine is too hot
after continuous usage
Battery is too hot after
continuous usage
SOLUTION
Charge the battery
Cool down the machine
Allow battery to cool or re-
place with a cool battery
6:$352 Manual_Revised_08 0924 Page 17