Filter
Top Products
The purpose of safety symbols is to attract you attention to possible dangers.
The safety symbols, and the explanations with them, deserve your careful atten-
tion and understanding. The symbol warnings do not, by themselves, eliminate
any danger. The instructions and warning they give are no substitutes for proper
accident prevention measures.
WARNING: Be sure to read and understand all safety instructions in this
manual, including all safety alert symbols such as "DANGER," "WARNING," and
"CAUTION" before using this Auto-Hammer. Failure to following all instructions
listed below may result in electric shock, fire, and/or serious personal injury.
SYMBOL SIGNAL MEANING
_. DANGER: Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates an imminently hazardous situation, which, if not
avoided, may result in death or serious injury.
CAUTION: (Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
WARNING: To ensure safety and reliability, all repairs should be performed
by a qualified service technician at Sears Service Center.
WARNING: The operation of any power tools can result in
foreign objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with side shield
and a full face shield when needed. We recommend a Wide
Vision Safety Mask for use over eyeglasses or standard safety
glasses with side shields. Always use eye protection which is
marked to comply with ANSI Z87.1
SAVE THESE INSTRUCTIONS
61352 Manual_Revised_08 0924 Page 3