Filter
Top Products
Use safety equipment. Always wear eye protection. Safety equipment,
such as dust masks, non-skid safety shoes, hard hat and hearing protection,
used for appropriate conditions will reduce personal injuries.
Avoid accidental starting. Ensure that the switch is in the off position before
plugging in. Carrying power tools with your finger on the switch or plugging
in power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A
wrench or key left attached to a rotating part of the power tool may result in
personal injury.
Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used. Use
of these devices can reduce dust-related hazards.
Use clamps or another practical way to secure and support the work=
piece to a stable platform. Holding the work by hand or against your body
leaves it unstable and may lead to loss of control.
Do not use on a ladder or unstable support. Stable footing on a solid
surface enables better control of the power tool in unexpected situations.
Keep handles dry, clean, and free from oil and grease. Slippery hands
can not safely control the power tool.
Always wear safety glasses with side shields. Everyday glasses have only
impact resistant lenses. They are NOT safety glasses. Following this rule will
reduce the risk of eye injury.
Protect your lungs. Wear a face or dust mask if the operation is dusty.
Following this rule will reduce the risk of serious personal injury.
Protect your hearing. Wear hearing protection during extended periods of
operation. Following this rule will reduce the risk of serious person injury.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and more safely at
the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and must
be repaired.
61352 Manual_Revised_08 0924 Page 7