Filter
Top Products
!:_..'_.:,]=liv_1=]li'il
Contents of Carton
1- Spray Gun
1- Owners Manuat
How to Set Up
Your Craftsman spray gun is shipped
completely assembled, and set-up for
siphon feed spraying.
Prior to shipment, this gun was treated
with an anticorrosive agent. Before
using this gun flush it with a suitable
solvent (mineral sprits is a suitabte
solvent).
To Flush Spray Gun Before Use
1. Removethe matehat cup from
lid/gun assembly. NOTE: Slide
release lever to the right, rotate
lid, and remove material cup.
Cup
"Lever
2. Fill the material cup 3/4 full with a
suitabte sotvent.
3. Aftach material cup to the lid/gun
assembly and slide release lever
to the left to secure in pIaee.
4. Aftach air suppty line to 1/4 NPT
air inlet. See "Connection"
paragraph in this section.
5. Putt trigger to spray solvent
through gun, see "How TO Use
Spray Gun" paragraph in the
"Operation" section of this manual
to operate spray gun.
6. Empty material cup of any
solvent.
How To Connect Spray Gun to
Air Supply
t. Attach air supply line to 1/4 NPT
air inlet. NOTE: A 318" diameter
air hose is recommended for the
best atomized air pressure. If
using a 1/4" or 5/16"diameter air
hose the air pressure must be set
at the regulator to allow for the
drop in air pressure from the
regulator to spray gun.
Air Hose Recommendation Examples
lpprox.
lozzle Air Hose
45 PSI
at air
_ply
at gun
3/8" x 25 _Air Hose -
Recommended
APpr°x"
10 I_i at
noz_e Air Hose
45 PSi
at: air
1/4" x 25 _Air Hose
Approx. _i
10 p;i at
nozzle Air Hose
45 PSI
at air
;_tgun
5/16 _'x 25 _Air Hose
5-ENG [:)29783