Filter
Top Products
Figure 79. Attach Label to Cable
2. Wrap the label around the cable until it fully encircles the cable. The bottom of each label is clear so
that it does not obscure the text.
Figure 80. Wrap Label Around Cable
3. Apply a matching label to the other end of the cable.
Removing an Expansion Enclosure from a Chain
Currently in Service
To remove an expansion enclosure, disconnect the expansion enclosure from one side of the chain at a
time.
About this task
During this process, one side of the chain is disconnected, and the Storage Center directs all IO to other
the side of the chain, which remains connected.
CAUTION: Make sure that your data is backed up before removing an expansion enclosure.
100
Adding or Removing an Expansion Enclosure