Filter
Top Products
5
Discover and Configure the Storage
Center
The Discover and Configure Uninitialized SCv2000 Series Storage Centers wizard allows you to set up a
Storage Center to make it ready for volume creation.
Use the Dell Storage Client to discover and configure the Storage Center. After configuring a Storage
Center, you can set up a localhost, VMware vSphere host, or VMware vCenter host using the host setup
wizards.
The storage system hardware must be installed and cabled before the Storage Center can be configured.
Worksheet to Record System Information
Use the following worksheet to record the information that is needed to install the SCv2000/SCv2020
storage system
.
Storage Center Information
Gather and record the following information about the Storage Center network and the administrator
user.
Table 5. Storage Center Network
Service Tag ________________
Management IPv4 address (Storage Center management address) ___ . ___ . ___ . ___
Top Controller IPv4 address (Controller 1 MGMT port) ___ . ___ . ___ . ___
Bottom Controller IPv4 address (Controller 2 MGMT port) ___ . ___ . ___ . ___
Subnet mask ___ . ___ . ___ . ___
Gateway IPv4 address ___ . ___ . ___ . ___
Domain name ________________
DNS server address ___ . ___ . ___ . ___
Secondary DNS server address ___ . ___ . ___ . ___
Table 6. Storage Center Administrator
Password for the default Storage Center “Admin” user ________________
Email address of the default Storage Center “Admin” user ________________
74
Discover and Configure the Storage Center