Filter
Top Products
9. Position lock handle (M) Fig. JI, on stud
and replace screw and spring (L) that were
removed in STEP 7. NOTE: Lock handle (M) is
spring-loaded and can be repositioned by lifting
up on handle.
ATTACHING DUST BAG
Depress spring clips (A) Fig. 8, of dust bag (B)
and clip dust bag (B) onto end of dust chute.
FASTENING MACHINE TO
SUPPORTING SURFACE
Before operating your compound miter saw,
firmly mount it to a workbench or other
supporting surface. Four holes, (A) Fig. 9, are
provided for fastening the saw to a supporting
surface.
When frequently moving the saw from place to
place, mount the saw to a 3/4” piece of
plywood. The saw can then be easily moved
from place to place and the plywood can be
clamped to the supporting surface using “C”
clamps.
STARTING AND STOPPING
MACHINE
To start the machine, depress switch trigger (A)
Fig. 10. To stop the machine, release the switch
trigger.
This saw is equipped with an automatic electric
blade brake. As soon as the switch trigger (A)
Fig. 10, is released, the electric brake is
activated and stops the blade in seconds.
8
Fig. 10
A
8
M
L
A
A
A
Fig. 8
A
A
B
Fig. 7J
Fig. 9