Filter
Top Products
25
TROUBLESHOOTING
For assistance with your machine, visit our website at www.deltamachinery.com for a list of service centers or call the
DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).
MAINTENANCE
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to
order parts, visit our website at
servicenet.deltamachinery.
com.
You can also order parts from your nearest factory-
owned branch, or by calling our Customer Care Center at
1-800-223-7278 to receive personalized support from highly-
trained technicians.
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or
replacement of parts. For information about Delta Machinery,
its factory-owned branches, or an Authorized Warranty
A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Delta
Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of your
nearest supplier.
Since accessories other than those offered by Delta have not been tested with this product, use of
such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used
with this product.
ACCESSORIES
KEEP MACHINE CLEAN
Periodically blow out all air passages with dry compressed
air. All plastic parts should be cleaned with a soft damp
cloth. NEVER use solvents to clean plastic parts. They
could possibly dissolve or otherwise damage the material.
Wear certified safety equipment for
eye, hearing and respiratory protection while using
compressed air.
FAILURE TO START
Should your machine fail to start, check to make sure
the prongs on the cord plug are making good contact
in the outlet. Also, check for blown fuses or open circuit
breakers in the line.
LUBRICATION & RUST PROTECTION
Apply household floor paste wax to the machine table,
extension table or other work surface weekly. Or use a
commercially available protective product designed for this
purpose. Follow the manufacturer’s instructions for use and
safety.
To clean cast iron tables of rust, you will need the following
materials: a sheet of medium Scotch-Brite™ Blending Hand
Pad, a can of WD-40
®
and a can of degreaser. Apply the
WD-40 and polish the table surface with the Scotch-Brite
pad. Degrease the table, then apply the protective product
as described above.
SERVICE
Service Center, visit our website at www.deltamachinery.
com or call our Customer Care Center at 1-800-223-7278. All
repairs made by our service centers are fully guaranteed against
defective material and workmanship. We cannot guarantee
repairs made or attempted by others.
You can also write to us for information at Delta Machinery,
4825 Highway 45 North, Jackson, Tennessee 38305 - Attention:
Product Service. Be sure to include all of the information shown
on the nameplate of your tool (model number, type, serial
number, etc.)