Filter
Top Products
English
5
you will receive years of trouble-free operation.The manufacturer
reserves the right to make changes in price, color, materials,
equipment specifications, or models at any time without notice.
Inspection of Compressor
Inspect for signs of obvious or concealed freight damage. Report any
damage to the delivering freight carrier immediately. Be sure that all
damaged parts are replaced and any mechanical problems are
corrected prior to the operation of the air compressor. The air
compressor serial number is located on the shroud of the
compressor. Please write the serial number in the space provided in
the service section for future reference.
WARNING: When using electric tools, basic safety precautions
should always be followed to reduce risk of fire, electric shock, and
personal injury.
DEWALT Air Compressor Features
PRESSURE SWITCH
This switch (A) is used to start or stop the air compressor. Moving the
switch to the ON position will provide automatic power to the
pressure switch which will allow the motor to start when the air tank
pressure is below the factory set cut-in pressure. When in the ON
(AUTO) position, the pressure switch stops the compressor from
charging air when the air tank pressure reaches the factory set cut-
out pressure limit. For ease of starting, this
switch also has a pressure release valve
located on the side of the switch designed to
automatically release compressed air from the
air compressor pump head and its discharge
line when the air compressor reaches the cut-
out pressure limit or is shut off. Moving the
switch to the OFF position will open the
pressure switch contacts and stop the air
compressor.
will remain hot for several minutes after operation. Do
not move the compressor while it is running. Hot motor
parts could cause burns contributing to the dropping of
the compressor, damaging the compressor and/or
injuring the operator.
RISK FROM NOISE
CAUTION: Wear appropriate personal hearing
protection during use. Under some conditions and
duration of use, noise from this product may contribute to
hearing loss
.
Introduction
Congratulations on the purchase of your new DEWALT Air
Compressor! You can be assured that this tool has been constructed
with the highest level of precision and accuracy. Each component
has been rigorously tested by technicians to ensure the quality,
endurance and performance of this air compressor.
By reading the following simple safety, installation, operation,
maintenance and troubleshooting steps described in this manual,
HOT SURFACES
AFTERCOOLER
PUMP
HEAD
PUMP CYLINDER
A
B
PUMP
HEAD
5135175-02,01.qxd 3/30/05 8:32 PM Page 5