Filter
Top Products
FIG.3
5
English
FIG. 4
CAPACITY OF CUT
50° miter left, 60° miter right
48˚ bevel left and right
US Models Non-US Models
Miter Bevel Max Max Max Max
Height Width Height Width
____ _____ ______ _____ ______ _____
0° 0° 4.3" 12" 4.3" 12"
45 L&R° 0° 4.3" 8.5" 4.3" 8.5"
0° 45° L 3.2" 12" 2.9" 12"
0° 45° R 1.7" 12" 1.7"` 12"
DRIVE
120 Volt Motor
2200 Watts
15 Amp Motor
4000 RPM
Cut Helical Gears with Roller Bearings
Multi-V Belt
60 Tooth Carbide Blade
Automatic Electric Brake
Optional Attachments/Accessories
WARNING: For safe operation, read instruction literature
included with attachments/accessories.
Extension Kit: DW7080
Used to support long overhanging workpieces, the work
support is user assembled. Your saw table is designed to
accept two work supports; one on each side. One set stores
conveniently under the saw table.
Adjustable Length Stop: DW7051
Requires the use of one work support (see kit above). It is
used to make repetitive cuts of the same length from 0 to 42"
(0 to 106cm).
Material Clamp: DW7082
Used for firmly clamping workpiece to the saw table for
precision cutting.
Crown Stop: DW7084
Used for precision cutting of crown molding.
Dust Bag: DW7053 (Some Models)
Equipped with a zipper for easy emptying.
NOTE: Spout has a provision to attach a vacuum hose to
collect sawdust. Proper orientation of dust bag is necessary
to avoid interference during operation of saw. If interference
cannot be avoided, dust bag must be removed. ALWAYS
MAKE A DRY RUN WITHOUT POWER BEFORE MAKING
ANY CUTS.
SAW BLADES: ALWAYS USE 12" (305mm) SAW BLADES.
SPEED RATING MUST BE AT LEAST 4800 RPM. USE OF
SMALLER DIAMETER BLADES MAY CAUSE SEVERE
DAMAGE TO SAW.
Application Blade No. of Type
BASE STABILIZER
TRIGGER SWITCH
SPINDLE LOCK BUTTON
KERF PLATE
BRUSH INSPECTION CAP
OPERATING HANDLE
BLADE GUARD
BLADE WRENCH
BEVEL
ADJUSTMENT/LOCK
HANDLE
BEVEL STOP SCREWS
MITER ADJUSTMENT/LOCK
HANDLE
DETENT
TRIGGER
DUST SPOUT
ARBOR COVER
LOCK DOWN PIN
MITER SCALE
TABLE
BASE
HAND HOLDS
FENCE
BELT COVER SCREW
BELT COVER
GROOVING STOP
FENCE ADJUSTMENT
KNOB (NOT SHOWN)
BENCH MOUNTING HOLES
THUMBSCREW
RAILS
LIFTING
HANDLE
RAIL LOCK KNOB
BEVEL STOP
OVERRIDE