Filter
Top Products
96D-Link DIR-827 User Manual
Section 4 - Security
Congure WPA-Personal (PSK)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based conguration by opening a web browser and entering the IP
address of the router (192.168.0.1). Click on Setup and then click Wireless Settings
on the left side.
2. Next to Security Mode, select WPA-Personal.
3. Next to WPA Mode, select Auto, WPA2 Only, or WPA Only. Use Auto if you have
wireless clients using both WPA and WPA2.
4. Next to Group Key Update Interval, enter the amount of time before the group key
used for broadcast and multicast data is changed (3600 is default).
5. Next to Pre-Shared Key, enter a key (passphrase). The key is entered as a pass-phrase
in ASCII format at both ends of the wireless connection. The pass-phrase must be
between 8-63 characters.
6. Click Save Settings to save your settings. If you are conguring the router with a
wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter
and enter the same passphrase as you did on the router.