D-Link DIR-827 Router User Manual


  Open as PDF
of 134
 
32D-Link DIR-827 User Manual
Section 3 - Conguration
802.11n/g (2.4GHz)
Check the box to enable the wireless function. If you do not want to use
wireless, uncheck the box to disable all the wireless functions.
Select the time frame that you would like your wireless network enabled.
The schedule may be set to Always. Any schedule you create will be
available in the drop-down menu. Click Add New to create a new schedule.
Service Set Identier (SSID) is the name of your wireless network. Create
a name using up to 32 characters. The SSID is case-sensitive.
Select one of the following:
802.11g Only - Select if all of your wireless clients are 802.11g.
Mixed 802.11n and 802.11g - Select if you are using both 802.11n and
802.11g wireless clients.
802.11n Only - Select only if all of your wireless clients are 802.11n.
The Auto Channel Scan setting can be selected to allow the DIR-827 to
choose the channel with the least amount of interference.
Indicates the channel setting for the DIR-827. By default the channel is set
to 6. The Channel can be changed to t the channel setting for an existing wireless network or to customize the wireless network. If you enable
Auto Channel Scan, this option will be greyed out.
Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance.
Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-827. If Invisible is selected, the SSID of the
DIR-827 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-827 in order to connect to it.
Refer to page 91 for more information regarding wireless security..
Enable Wireless:
Schedule:
Wireless
Network Name:
802.11 Mode:
Enable Auto
Channel Scan:
Wireless
Channel:
Transmission
Rate:
Channel Width:
Visibility Status:
Wireless Security:
 previous next