Filter
Top Products
3
Symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Conforms to EMC regulations.
Specifications
Nominal voltage: 230–240Vac ~ 50Hz
Power: 375W
Chuck capacity: 13mm
Chuck type: Keyless
Spindle axis to column distance: 125mm
Maximum spindle travel: 60mm
Speed ranges: 230, 330, 370, 460,
530, 580, 1030,
1160, 1280, 1600,
1790, 2470 RPM
Laser class: 1
Laser wavelength: 650nm
Laser output power: ≤1Mw
Dear Customer
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or 0800 445 721 in
New Zealand.
Introduction
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service
.
Caution. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings
.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate
.
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.
Warnings.
It may be more difficult to see the laser line in conditions
of bright sunshine and on certain surfaces.