Filter
Top Products
7
Caution! Do not expose to rain or use in damp locations.
Warning! For your own safety read instruction manual
before operating drill press. Wear eye protection, do not
wear gloves, necktie or loose clothing, clamp workpiece
or brace against column to prevent rotation, use
recommended speed for drill accessory and workpiece
material.
Unpacking
Due to modern mass production techniques, it is unlikely
that your GMC Power Tool is faulty or that a part is
missing. If you find anything wrong, do not operate the
tool until the parts have been replaced or the fault has
been rectified. Failure to do so could result in serious
personal injury.
Required tools
The following tools are required to assemble the drill press
• 3mm, 4mm, 6mm Hex Keys (Supplied)
• 16mm Wrench (Not Supplied)
• Phillips Head Screwdriver (Not Supplied)
Assembly time
The LDP13F drill press will take approximately 20 minutes
to assemble.