Pump Repair
22 309977H
Assemble Pump
1. Fig. 16. Place end of piston rod (203) in vise. Install
new piston seal (222). Torque piston valve to 27 ft-lb
(36.6 Nm).
F
IG.16
2. Fig. 17. Install packing nut (216). Hand tighten and
then tap screw driver. Push piston rod (203) into out-
let housing (202) and extending 50-75mm out of
outlet housing.
FIG.17
3. Install clamp (209) on pump cylinder (201). Torque
clamp to 25 in-lb (2.82 Nm).
FIG.18
4. Install clamp (209) on intake housing (204). Torque
clamp to 25 in-lb.
FIG.19
5. See Pump Repair, Installation on page 20 to
install pump.
WLD
WLD
PP
WLD
WLD