Filter
Top Products
Common Procedures
8 3A2587H
Common Procedures
Trigger Lock
Prime/Spray Valve
Follow the Pressure Relief Procedure
whenever you see this symbol.
Pressure Relief Procedure
1. Engage trigger lock.
2. Put prime/spray valve UP to release pressure.
Always engage the trigger lock when you stop spraying
to prevent the sprayer from being triggered accidentally
by hand, or if dropped or bumped.
Trigger Locked
Trigger Unlocked
(red ring is visible)
ti18913a
ti18912a
UP position
(For priming and releasing
DOWN position
(Ready to spray)
ti14999a
pump pressure)
ti16700a
ti16701a
Do not operate or spray near children. Do not aim the
sprayer at, or spray any person or animal. Keep hands
and other body parts away from the discharge. For
example, do not try to stop the paint flow with any part
of the body.
This sprayer builds up an internal pressure of 2000 psi
(14 MPa, 138 bar) during use. Follow this Pressure
Relief Procedure whenever you stop spraying and
before cleaning, checking, servicing, or transporting
equipment to prevent serious injury.
ti18912a
ti14999a
ti16700a