Filter
Top Products
Outlet Valve Fitting Repair
26 3A2589D
Outlet Valve Fitting Repair
NOTE: Before doing any repair to pump, perform
Flushing Sprayer procedure, page 15.
Removal
1. Engage trigger lock and pull prime/spray valve UP
to release pressure.
2. Remove battery.
3. Remove outlet valve fitting access plug.
4. Use tool (supplied) to loosen and remove outlet
valve fitting. Make sure old o-ring, seat, outlet valve
fitting, and spring are out of pump outlet cavity.
Installation
1. Screw outlet valve fitting into threads. Use tool
(supplied) and tighten to 8 ft-lb (11 N•m).
2. Press outlet valve fitting access plug into place.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury from
pressurized fluid, such as skin injection, splashing fluid
and moving parts, follow the Pressure Relief
Procedure when you stop spraying and before
cleaning, checking, or servicing the equipment.
Move sprayer to a non-hazardous area before servicing.
ti16700a
ti18866a
ti14996a
ti16745a
ti15503a
ti18901a
ti15506a
ti18903a
ti15508a
ti18904a
ti15507a
ti18902a