Filter
Top Products
Troubleshooting
3A2589D 27
Troubleshooting
Check everything in this Troubleshooting Table before
you bring the sprayer to an authorized service center.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury
from pressurized fluid, such as skin injection,
splashing fluid and moving parts, follow the
Pressure Relief Procedure when you stop spraying
and before cleaning, checking, or servicing the
equipment.
Problem Cause Solution
Sprayer makes no sound when
trigger is pulled
Trigger is locked. Disengage trigger lock. See page 7.
Sprayer status indicator light is solid
RED when triggering, indicating that
the battery charge is low, or the bat-
tery is too cold.
Replace with charged battery and place
old battery in charger, or allow battery to
warm up.
Sprayer status indicator light is flash-
ing RED when triggering, indicating
that the battery is too hot to operate.
Allow battery to cool.
Sprayer status indicator light does
not light when sprayer is triggered.
Battery is not installed or is damaged.
Install battery or replace.
Motor/control board kit has reached
maximum life.
Replace motor/control board kit.