Graco XP70 Paint Sprayer User Manual


 
Component Identification
3A0420H 15
Air Line
Bleed-type master air valve (CA): required in your sys-
tem to relieve air trapped between it and the air motor
when the valve is closed.
Be sure the valve is easily accessible from the pump
and located downstream from the air regulator.
Pump air regulator (CB): to control pump speed
and outlet pressure.
Air line filter (C): 40 micron filter that removes
harmful dirt and moisture from compressed air sup-
ply. Accumulated water is automatically drained
from the filter.
Fluid Line Accessories
Fluid Manifold (AA): mounts fluid gauges and over
pressure relief valves. Controls circulation and
pump priming.
Mix Manifold (AB): brings A and B fluid together.
Provides control and check valves for A, B, and flush
fluids.
Circulation Handle (AC): open to relieve fluid pres-
sure, prime pumps, and circulate material in hop-
pers. Close to spray mixed material.
Dual Shutoff Handle (AE): Controls A and B on/off
flow into mix manifold. Press down to provide A and
B fluid to the mix manifold and into the static mixer
for spraying. Press up to turn off A and B before
flushing the mixed material.
Solvent Flush Valve (AD): to flush solvent through
mix manifold, hose, and spray gun.
Static mixer/gun hose kit: to mix the two fluids and
deliver mix to the spray gun. Includes static mixer
and hoses to the spray gun.
Optional Accessories
Optional Fluid Heaters (N): to heat the resin and
hardener before mixing. Improves the chemical
reaction and lowers viscosity to improve the spray
pattern.
Optional Solvent Flush Kit (G): to flush the mix
manifold. Includes a solvent pump, mounting hard-
ware, and solvent supply hose.
Flush Before Using Equipment
The equipment was tested with lightweight oil, which is
left in the fluid passages to protect parts. To avoid con-
taminating your fluid with oil, flush the equipment with a
compatible solvent before using the equipment. See
Empty and Flush Entire System (new sprayer or end
of job), page 27.
Trapped air can cause the pump to cycle unexpect-
edly, which could result in serious injury from splash-
ing or moving parts.