Filter
Top Products
16 308741
Daily Gun Care, Flushing, and Cleaning
14. Trigger the gun while you install the fluid nozzle
(12) with the gun tool (28). Tighten the nozzle
securely to 125–135 in-lb (14–15 NSm) to obtain a
good seal.
15. Install the air cap retaining ring (15) and air
cap (14).
Fig. 23
12
14, 15
7045A
28
Torque to 125–135 in-lb (14–15 NSm)
1
1
16. Dampen a soft cloth with solvent and wring-out the
excess. Point the gun down and wipe off the
outside of the gun.
Fig. 24
7047A
17. After cleaning the gun, lubricate the following parts
with lubricant 111265 daily:
D Fluid adjustment knob threads
D Trigger pivot pin
D Fluid needle shaft
Fig. 25
Lubricate
Lubricate
07032A