Filter
Top Products
G0444/G0444Z 10" Table Saw -13-
The Model G0444/G0444Z is shipped from the
manufacturer in carefully packed boxes. If you
discover the machine is damaged after you have
signed for delivery, please immediately call
Customer Service at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory the
parts.
The purpose of this section is to guide you
through the required steps to get your machine
out of its packaging and into operating condition.
Wear safety glasses dur-
ing the entire set up
process!
This machine presents
serious injury hazards
to untrained users. Read
through this entire man-
ual to become familiar
with the controls and
operations before start-
ing the machine!
DESCRIPTION QTY
Hand Tool Hardware Bag:
• Combo Wrench 12 x 13 ..............................1
• Arbor Wrench 23mm....................................1
• Hex Key 2mm ..............................................1
• Hex Key 3mm ..............................................1
• Hex Key 4mm ..............................................1
Rubber Feet Hardware Bag:
• Rubber Feet ................................................4
• Phillips Head Screws
1
⁄4"-20 x 1" ................4
• Hex Nuts
1
⁄4"-20............................................4
• Flat Washers
1
⁄4" ..........................................4
Stand Hardware Bag:
• Hex Bolts
5
⁄16"-18 x 1" ..................................4
• Hex Nuts
5
⁄16"-18 ........................................44
• Flat Washers
5
⁄
16" ......................................48
• Carriage Bolts
5
⁄16"-18 x
5
⁄8" ........................40
• Lock Washers
5
⁄16"......................................44
Motor Mounting Hardware Bag:
• Hex Bolts
5
⁄16"-18 x 1....................................4
• Hex Nuts
5
⁄16"-18 ..........................................4
• Flat Washers
5
⁄
16" ........................................8
• Lock Washers
5
⁄16"........................................4
• Flat Washer
1
⁄4" ............................................1
• Carriage Bolt
1
⁄4"-20 x 1
3
⁄4" ..........................1
• Brass Wing Nut
1
⁄4"-20 ................................1
• Fiber Washer
5
⁄16" ........................................1
• Speed Nut
1
⁄4" ..............................................1
Blade Guard Hardware Bag:
• Blade Guard ................................................1
• Blade Guard Mounting Bracket Assembly ..1
• Blade Guard Mounting Shaft ......................1
• Hex Nut
1
⁄2"-12 ............................................1
• Flat Washer
1
⁄2" ..........................................1
Extension Wing Hardware Bag:
• Hex Bolts
7
⁄16"-14 x 1
1
⁄4"................................6
• Lock Washers
7
⁄16"........................................6
Dust Hood Hardware Bag:
• Phillips Head Screws #10-24 x
5
⁄8" ..............2
• Hex Nuts #10-24 ..........................................2
• Star Washers #10 ........................................2
• Toggle Tabs ................................................2
Parts Inventory
Unpacking
About this Section
SECTION 5: SET UP