Filter
Top Products
G0528 Sliding Router Table -11-
This section covers the basic assembly and
adjustment instructions needed to begin opera
-
tion. Complete the assembly in the order pro
-
vided in this manual and then read the remaining
portion of the manual before attempting any type
of operation.
Your safety is important! Please follow the
warnings below during this entire section:
Loose hair and cloth-
ing could get caught
in machinery causing
serious personal inju
-
ry. Keep loose clothing
rolled up and long hair
tied up and away from
machinery.
Projectiles thrown from
the machine could cause
serious eye injury. Wear
safety glasses during
assembly.
Disconnect power to
the machine during the
entire assembly process.
Failure to do this may
result in serious person
-
al injury.
!
Sharp edges on metal
parts may cause personal
injury. Examine the edges
of all metal parts before
handling.
Components Needed: Qty
Rubber Feet .......................................................
4
Phillips Screws
1
⁄4"-20 x 1" .................................4
Hex Nuts
1
⁄4"-20 ..................................................4
Flat Washers
1
⁄4" .................................................4
Tools Needed:
10mm Wrench or Socket ....................................
1
Phillips Head Screwdriver ..................................
1
To install the rubber feet:
Secure the rubber feet to the stand legs with the
Phillips screws, the hex nuts, and the flat washers
(Figure 4).
Figure 4. Rubber feet installation.
Rubber FeetAssembly