Filter
Top Products
G0612 6" Jointer
-9-
Wear safety glasses dur-
ing the entire set up pro
-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu
-
al to become familiar with
the controls and opera
-
tions before starting the
machine!
Setup Safety
SECTION 3: SETUP
The jointer is heavy
(approximately 100 lbs).
DO NOT over-exert your
-
self while unpacking or
moving your machine—
get assistance.
The Model G0612 was carefully packed when it
left our warehouse. If you discover the machine
is damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663
for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con
-
dition of your shipment, you should inventory the
contents.
Unpacking
Items Needed for
Setup
The following items, needed to complete the setup
process, are not included with your machine:
*
DESCRIPTION Qty
• People for Lifting ........................ As Needed
• Straightedge ...............................................
1
• Machinist's Combination Square ................
1
• Flat Head Screwdriver ................................
1
• Phillips Head Screwdriver ..........................
1
• Wrench 10mm ............................................
1
• Wrench 8mm ..............................................
2
• Mounting Hardware ................... As Needed
(See Page 12
).
• Degreaser and Rags ................. As Needed