Filter
Top Products
G0622 4" X 6" Metal Cutting Bandsaw
-27-
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person
-
al injury.
Lubrication
Cleaning the Model G0622 is relatively easy.
After using your bandsaw, remove excess chips
by sweeping. Then send chips for recycling.
Cleaning
SECTION 6: MAINTENANCE
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check
:
• Loose mounting bolts.
• Damaged saw blade.
• Worn or damaged wires.
• Any other unsafe condition.
• Clean after each use.
Monthly Check:
• V-belt tension, damage, or wear.
• Lubricate vise screw.
Annual Check:
• Lubricate gear box.
Schedule
Before applying lubricant to any area, wipe the
area clean to avoid contamination.
Lubricate the
vice screw shown in Figure 40 with general pur
-
pose grease.
Figure 40. Location to lubricate vise screw.
Figure 41. Gear box location.
Gear Box
Remove the cover on the gear box in Figure 41
and coat the gears with general purpose grease.