Filter
Top Products
Spindle Turning
Figure 30
Figure 30.
Workpiece
Workpiece
Center
Pencil Lines
Marked Diagonally
Across Corners
Figure 31.
Setting Up for Spindle Turning
1.
Figure 31
2.
3.
4.
Step 1
Note: If your workpiece is over 2" x 2", cut the
corners off the workpiece lengthwise to make
turning safer and easier.
Damage to your eyes and lungs could result
from using this machine without proper pro-
tective gear. Always wear a face shield and
respirator when operating this machine.
NOTICE
Always disconnect the lathe from power
before using the spindle lock feature. Never
resume turning operations without making
sure that the spindle lock is disengaged and
the spindle turns freely by hand. Otherwise
machine damage could result.