Grizzly G0694 Lathe User Manual


  Open as PDF
of 60
 


Figure 64.

Figure 65.

14.   




      
     
Figures64–65
NOTICE
Do not spin a spindle bearing while blow-
ing it off with compressed air or it could fly
apart.
15.        


16.    

Step 11

17. Figure 66


Figure 66.

18. 
       


NOTICE
For the next step you will use the span-
ner nut to press the bearing back onto the
shaft. Do not keep tightening the spanner
nut once the end place is removed from the
spindle or you will destroy the bearings!
 previous next