Filter
Top Products
-2-
Model G0758 (Mfd. Since 2/14)
INTRODUCTION
The Model G0758 is a high-precision mill/drill with
a 600 Watt (
3
⁄4 HP) high-torque, low noise motor,
with low speed gearing for maximum torque in the
lowest RPM range.
This mill/drill has a spindle-to-table distance of 9"
with a 13
1
⁄4" swing. It has an R-8 spindle size and
features manual downfeed controls with a variable
spindle speed range from 50–2000 RPM. DRO's
for both the spindle speed and spindle downfeed
stroke allow precise operation. The headstock tilts
45° left/right and moves in the Z-axis along dove-
tailed ways for maximum precision.
The large 5
1
⁄2" x 19
11
⁄16" table features manual 13"
(X-axis) and 5
1
⁄2" (Y-axis) travel. All table move-
ment is along precision-ground dovetailed ways.
An optional stand (Model T26612) is available for
purchase at www.grizzly.com.
Machine Description
We are proud to provide a high-quality owner’s
manual with your new machine!
We
made every effort to be exact with the
instruc-
tions, specifications, drawings, and photographs
contained inside. Sometimes we make mistakes,
but
our policy of continuous improvement
also
means that
sometimes the machine
you receive
will be slightly different than what is shown in
the manual
.
If you find this to be the case, and the difference
between the manual and machine leaves you
confused about a procedure
, check our website
for an updated version. W
e post current
manuals
and
manual updates for free on our website at
www.grizzly.com
.
Alternatively, you can call our Technical Support
for help. Before calling, please write down the
Manufacture Date
and Serial Number
stamped
into the machine ID label (see below). This infor-
mation helps us determine if updated documenta-
tion is available for your machine.
Manufacture Date
Serial Number
Manual Accuracy
We stand behind our machines. If you have
any questions or need help, use the information
below to contact us. Before contacting, please get
the serial number and manufacture date of your
machine. This will help us help you faster.
Grizzly Technical Support
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Email: techsupport@grizzly.com
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
Contact Info