Filter
Top Products
-8-
SECTION 3: INTRODUCTION
We are proud to offer the Grizzly Models
G1006/G1007 Milling/Drilling Machine. These
machines are part of a growing Grizzly family of
fine metalworking machinery. When used
according to the guidelines set forth in this man-
ual, you can expect years of trouble-free, enjoy-
able operation, proof of Grizzly’s commitment to
customer satisfaction.
The Model G1006/G1007 is a combination milling
and drilling machine that is capable of a numer-
ous machining operations. The spindle is fitted to
use R-8 arbors and holders allowing the use of a
wide variety of industry standard tooling. The
table has T-slots which fit the G1076
1
⁄2'' clamping
kit. The G1006/G1007 comes complete with
motor and electrical package. The G1007 is sup-
plied with a power feed for longitudinal motion.
A number of accessories for the Model
G1006/G1007 are available through the Grizzly
catalog.
We are also pleased to provide this manual with
the Models G1006/G1007. It was written to guide
you through assembly, review safety considera-
tions, and cover general operating procedures. It
represents our effort to produce the best docu-
mentation possible. If you have any comments
regarding this manual, please write to us at the
address below:
Grizzly Industrial, Inc.
C
/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our machines.
If you have any service questions or parts
requests, please call or write us at the location
listed below.
Grizzly Industrial, Inc.
2406 Reach Road
Williamsport, PA 17701
Phone: (570) 326-3806
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
The specifications, drawings, and photographs
illustrated in this manual represent the Models
G1006/G1007 as supplied when the manual was
prepared. However, owing to Grizzly’s policy of
continuous improvement, changes may be made
at any time with no obligation on the part of
Grizzly. Whenever possible, though, we send
manual updates to all owners of a particular tool
or machine. Should you receive one, we urge you
to insert the new information with the old and
keep it for reference.
To operate this, or any power tool, safely
and efficiently, it is essential to become as
familiar with its characteristics as possible.
The time you invest before you begin to use
your Model G1006/G1007 will be time well
spent. DO NOT operate this machine until
you are completely familiar with the con-
tents of this manual. Make sure you read
and understand all of the safety proce-
dures. If you do not understand something,
DO NOT operate the machine.
Commentary
G1006/G1007 Mill/Drill