Filter
Top Products
-9-
G1006/G1007 Mill/Drill
Unpacking
This Milling/Drilling Machine is shipped from the
manufacturer in a carefully packed crate. If you
discover the machine is damaged after you’ve
signed for delivery, and the truck and driver are
gone, you will need to file a freight claim with the
carrier. Save the containers and all packing mate-
rials for possible inspection by the carrier or its
agent. Without the packing materials, filing a
freight claim can be difficult. If you need assis-
tance determining whether you need to file a
freight claim, or with the procedure to file one,
please contact our Customer Service.
Piece Inventory
The G1006/G1007 is a heavy machine (670
lbs. shipping weight). DO NOT over-exert
yourself while unpacking or moving your
machine – get assistance. In the event that
your machine must be moved up or down a
flight of stairs, be sure that the stairs are
capable of supporting the combined weight
of people and the machine. Serious per-
sonal injury may occur.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
NOTICE
A full parts list and breakdown can be found
toward the end of this manual. For easier
assembly, or to identify missing parts,
please refer to the detailed illustrations at
the end of the manual.
Most of the G1006/G1007 has been pre-assem-
bled at the factory. Therefore, there are very few
loose parts.
You will find the following parts accompanying
the G1006/G1007:
• Drilling Angle Vise
• Feed Levers with Knobs (3)
• Handwheels w/Handles (3)
• Lug Wrench
• Drill Chuck w/Key
• Drill Chuck Arbor (installed)
• Fly Cutter
• R-8 Arbor
• Cap Screw w/Washer
• Head Crank w/Handle
In addition to the parts listed above, the G1007
comes with the power feed and its attachment
accessories.
If anything is missing, call or write to the service
department listed in the previous Section.