Filter
Top Products
-6- G1013 Combination Sander
SECTION 3: Introduction
We are proud to offer the Grizzly Model G1013
Combination Sander. The Model G1013 is part of
a growing Grizzly family of fine woodworking
machinery. When used according to the guide-
lines set forth in this manual, you can expect
years of trouble-free, enjoyable operation and
proof of Grizzly’s commitment to customer satis-
faction.
The Model G1013 is a combination 1" x 42" belt
and 8" disc sander that is capable of a wide vari-
ety of operations. The 1" wide belt enables you to
sand small or finely-detailed pieces as well as the
inside areas of closed loops. With the 8" disc and
table, larger surfaces can be sanded at many dif-
ferent angles. The Model G1013 comes complete
with motor and electrical package.
A number of sanding discs and belts for the
Model G1013 are available through the Grizzly
catalog.
We are also pleased to provide this manual with
the Model G1013. It was written to guide you
through assembly, review safety considerations,
and cover general operating procedures. It repre-
sents our effort to produce the best documenta-
tion possible. If you have any comments regard-
ing this manual, please write to us at the address
below:
Grizzly Industrial, Inc.
C
/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our machines.
If you have any service questions or parts
requests, please call or write us at the location
listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 326-3806
Fax: (800) 438-5901
E-Mail: techsupport@grizzlyindustrial.com
Web Site: http://www.grizzlyindustrial.com
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G1013 as supplied when the manual was pre-
pared. However, owing to Grizzly’s policy of con-
tinuous improvement, changes may be made at
any time with no obligation on the part of Grizzly.
Whenever possible, though, we send manual
updates to all owners of a particular tool or
machine. Should you receive one, we urge you to
insert the new information with the old and keep
it for reference.
Commentary
Read the manual before
assembly and operation.
Become familiar with
the machine and its
operation before begin-
ning any work. Serious
personal injury may
result if safety or opera-
tional information is not
understood or followed.