Filter
Top Products
-8- G1183/1276 Combination Sander
Unpacking
The Combination Sander is shipped from the fac-
tory in a carefully packed carton. If you find the
machine to be damaged after you’ve signed for
delivery and the truck and driver are already
gone, you will need to file a freight claim with the
carrier. Save the containers and all packing mate-
rials for inspection by the carrier or their agent.
Without the packing materials, filing a freight
claim can be difficult. If you need advice regard-
ing this situation, please call us.
Piece Inventory
With all the parts removed from the container,
you should have components as listed below and
shown in Figure 3:
• Motor Body and Belt Assembly
• Disc Table
• Belt Table
• Allen
®
Wrench
• Miter Gauge
• Handle
If anything is missing, call or write to the appro-
priate service department listed in the General
Information section. If anything is damaged,
please follow the procedures described to the left.
NOTICE
Please keep all packaging materials until
you are satisfied that the machine is in
good condition. Should you need to file a
freight claim, the carrier’s agent will require
inspection of those materials. Settling a
claim can be difficult if packaging is not
available.
NOTICE
Ensure that the Model G1183/G1276 is
located on a flat, level surface. This will
maximize the stability of the machine and
ensure that adjustments are accurate. For
conditions where permanent mounting is
possible, we recommend bolting the
Combination Sander to your bench top or
work table. This type of mounting will mini-
mize vibration and provide a more stable
work environment.
The G1183/1276 is a fairly heavy machine
(155 lbs.). DO NOT over-exert yourself while
unpacking or moving your machine – get
assistance. In the event that your Combination
Sander must be moved up or down a flight of
stairs, be sure that the stairs are capable of
supporting the combined weight of people and
the machine. Serious personal injury may
occur.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
Figure 3. Combination sander components.