Filter
Top Products
-8-
Unpacking
The Model G8622 Shaper is shipped from the
manufacturer in a carefully packed carton. If you
discover the machine is damaged after you have
signed for delivery, and the truck and driver are
gone, you will need to file a freight claim with the
carrier. Save the containers and all packing mate-
rials for possible inspection by the carrier or its
agent. Without the packing materials, filing a
freight claim can be difficult. If you need assis-
tance determining whether you need to file a
freight claim, or completing the procedure to file
one, please contact our Customer Service.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
G8622 Tilting Spindle Sliding Table Shaper
Figure 2. Shaper base unit.
After all the parts have been removed from the
carton, you should have:
• Shaper Unit (Figure 2)
• Miter Gauge Kit (Figure 3)
• Hardware (Figure 4)
Figure 3. Miter Gauge Kit.
The Miter Gauge Kit Hardware and Qty:
Miter Gauge 1
Fence 1
Clamping Unit 1
Support Fence 1
Push Shaft 1
Pointer 1
Washer 1
Bolts 2
Threaded Knob 1
Special Nuts 3
Ratchet Handle 1
If moving this machine up or
down stairs, the machine
must be dismantled and
moved in smaller pieces.
Make sure the stairs are
capable of supporting the
combined weight of the
machine parts and the peo-
ple moving them.
The G8622 is a heavy
machine, 770 lbs. ship-
ping weight. DO NOT
over-exert yourself
while unpacking or
moving your machine –
you will need assis-
tance and power equip-
ment. Serious personal
injury may occur if safe
moving methods are not
followed.