Filter
Top Products
H2801 4" Jointer -15-
SECTION 6: OPERATIONS
Keep loose clothing out
of the way of machinery
and keep hair pulled
back.
Wear safety glasses dur-
ing all operations on the
jointer. Failure to comply
may result in serious
personal injury.
Disconnect power to the
machine when perform-
ing any adjustments or
maintenance. Failure to
do this may result in seri-
ous personal injury.
Always wear a dust mask
when operating the joint-
er. Using this machine
produces sawdust which
may cause allergic reac-
tions or respiratory prob-
lems.
NOTICE
The following section was designed to give
instructions on the basic operations of this
jointer. However, it is in no way comprehen-
sive of every jointer application. There are
many different jigs that can be built to
increase safety, accuracy, and types of
cuts. WE STRONGLY RECOMMEND that
you read books, trade magazines, or get for-
mal training to maximize the potential of
your jointer.
Once assembly is complete and adjustments are
done to your satisfaction, you are ready to start
the machine.
Plug the machine into the power supply. Flip the
switch up to the start position. Make sure that
your finger is poised over the switch in case you
need to turn the jointer off. The jointer should run
smoothly with little or no vibration or rubbing nois-
es. Strange or unnatural noises should be inves-
tigated and corrected before operating the
machine further.
Run the Model H2801 for a short time to ensure
that the moving parts are working properly with
no excessive vibration. If any problem develops,
correct it before attempting to use the machine.
If you cannot locate the source of unusual noises
or cannot fix any problems that arise, immediate-
ly contact our service department for help.
Test Run
Read the entire manual
before making any cuts
with your jointer.
Serious personal injury
may result if safety or
operational information
is not understood or fol-
lowed.