Filter
Top Products
-22- H2801 4" Jointer
SECTION 8: CLOSURE
The following pages contain general machine
data, parts diagrams/lists, troubleshooting guide
and Warranty/Return information for your Model
H2801 4" Jointer.
If you need parts or help in assembling your
machine, or if you need operational information,
we encourage you to call our Service
Department. Our trained service technicians will
be glad to help you.
If you have comments dealing specifically with
this manual, please write to our Bellingham,
Washington location using the address in the
General Information section. The specifications,
drawings, and photographs illustrated in this
manual represent the Model H2801 as supplied
when the manual was prepared. However, due to
Grizzly’s policy of continuous improvement,
changes may be made at any time with no oblig-
ation on the part of Grizzly. Whenever possible,
though, we send manual updates to all owners of
a particular tool or machine. Should you receive
one, add the new information to this manual and
keep it for reference.
We have included some important safety mea-
sures that are essential to this machine’s opera-
tion. While most safety measures are generally
universal, Grizzly reminds you that each work-
shop is different and safety rules should be con-
sidered as they apply to your specific situation.
We recommend you keep a copy of our current
catalog for complete information regarding
Grizzly's warranty and return policy. If you need
additional technical information relating to this
machine, or if you need general assistance or
replacement parts, please contact the Service
Department listed in the Introduction section.
Additional information sources are necessary to
realize the full potential of this machine. Trade
journals, woodworking magazines and your local
library are good places to start.
Like all power tools, there is danger associ-
ated with the Model H2801 4" Jointer.
Accidents are frequently caused by lack of
familiarity or failure to pay attention. Use this
tool with respect and caution to lessen the
possibility of operator injury. If normal safety
precautions are overlooked or ignored, seri-
ous personal injury may occur.
The Model H2801 was specifically designed
for cutting wood only. DO NOT MODIFY
AND/OR USE THIS MACHINE FOR ANY
OTHER PURPOSE. Modifications or improp-
er use of this tool will void the warranty. If
you are confused about any aspect of this
machine, DO NOT use it until all your ques-
tions have been answered, or serious per-
sonal injury may occur.
Operating this equipment has the potential
for flying debris to cause eye injury. Always
wear safety glasses or goggles when oper-
ating equipment. Everyday glasses or read-
ing glasses only have impact resistant lens-
es, they are not safety glasses. Be certain
the safety glasses you wear meet the appro-
priate standards of the American National
Standards Institute (ANSI).