Filter
Top Products
-6- H3114 Router Table
SECTION 3: CIRCUIT REQUIREMENTS
General
Electrical
The power switch (Page 7, Figure 2) on the
Model H3114 is designed to work with most
routers and other electrical accessories. The
power switch provides the convenience of switch-
ing power to the router and accessories at the
front of the router table instead of having to reach
under the table and locate multiple switches. The
power switch also allows multiple devices such as
lights or vacuums to be powered on when the
router is powered on.
The Model H3114 power switch is designed to
accept 2-prong DOUBLE INSULATED plugs or 3-
prong grounding type plugs. The power switch
plugs into a wall outlet that is properly grounded
as shown in Figure 1.
If the machine is wired incorrectly a fire
could result. Make sure your wiring, recep-
tacle, plug, and circuit breaker can handle
the current draw of the machine. If you are
not sure that your electrical circuit can han-
dle the current draw, get a qualified electri-
cian to test your electrical system and do
any required upgrades. Do not attempt to
modify an existing circuit by only replacing
the circuit breaker with one rated for a high-
er amperage draw than the wiring, recepta-
cle, and plug are rated for.
Figure 1. Power switch 3-prong plug and
grounding style outlet.
Grounding Prong
Current Carrying Prongs
Grounded Outlet