Filter
Top Products
-10- H3118 Tile Saw
Assembly
Figure 3. Attaching the rubber feet.
The Model H3118 comes pre-assembled from the
factory except for the four rubber feet that need
inserting as shown in Figure 3. Dip the rubber
feet into soapy water to ease the installation.
Note–DO NOT twist the rubber feet during instal-
lation. They could break. Use only a wiggling
action.
Loose hair and clothing
could get caught in
machinery causing seri-
ous personal injury.
Keep loose clothing
rolled up and long hair
tied up and away from
machinery.
Serious personal injury
could occur if you con-
nect your machine to the
power source before you
have completed the
assembly process. DO
NOT connect the
machine to the power
source until instructed to
do so.
!
Sharp edges on metal
parts may cause person-
al injury. Examine the
edges of all metal parts
before handling.