Filter
Top Products
-12- H3118 Tile Saw
Lubrication
Water is used to cool and lubricate the saw blade
when cutting tile. Water also reduces the amount
of tile dust produced. Fill the water tray with water
before making any tile cuts. The water level
should be above the blade cover base when the
water tray is under the saw as shown in Figure
6.
Figure 6. Water tray.
Figure 5. Removable safety key
for the power switch.
4. Turn the machine ON and make sure your
hand is on the power switch in case you
need to quickly turn the machine OFF. The
machine should run smoothly with little or no
vibration.
3. If not already installed, plug the safety key
into the power switch as shown in Figure 5.
The switch will only turn the saw on when the
safety key is installed.
Maximum Water Level