Filter
Top Products
G5959/G9957 12" Table Saw -11-
Unpacking
The Model G5959/9957 is shipped from the man-
ufacturer in a carefully packed carton. If you dis-
cover the machine is damaged after you have
signed for delivery, please call Customer Service
immediately for advice.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
The G5959/9957 is a
heavy machine, 1000
lbs. shipping weight.
DO NOT over-exert
yourself while unpack-
ing or moving your
machine – you will need
assistance and power
equipment. Serious per-
sonal injury may occur
if safe moving methods
are not followed.
Make sure floor structure
is capable of supporting
the combined weight of
the machine parts and
people.
Some metal parts may
have sharp edges on
them after they are
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.
Piece Inventory
After all the parts have been removed from their
containers, you should have:
1. Table Saw Cabinet (Not Shown)
2. Miter Gauge
3. Extension Wings (2)
4. Fence
5. Splitter/Guard Assembly
6. Splitter/Guard Support
7. Hardware Bag
8. Arbor Spanner Wrench
9. Open End Wrench (2)
10. Allen
®
Wrench Set
11. Arbor Extension Assembly
12. Motor Cover
13. Dado Table Insert
14. Standard Table Insert (Not Shown)
15. Fence Agle Irons (2)
16. Fence Rail
17. Tool Box
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be glad
to replace them; or for the sake of expediency,
replacements can be obtained at your local hard-
ware store.
Figure 6. G5959/9957 component layout.
3
4
5
6
7
8
9
10
17
11
12
2
13
15
15
16