Filter
Top Products
-34- G5959/G9957 12" Table Saw
The following pages contain general machine
data, troubleshooting guide, parts diagram, parts
list and Warranty/Return information for your
Model G5959/9957.
If you need parts or help in assembling your
machine, or if you need operational information,
we encourage you to call the Customer Service
Department. Our trained service technicians will
be glad to help you.
If you have comments dealing specifically with
this manual, please write to our Bellingham,
Washington location using the address in the
Introduction. The specifications, drawings, and
photographs illustrated in this manual represent
the Model G5959/9957 as supplied when the
manual was prepared. However, due to Grizzly’s
policy of continuous improvement, changes may
be made at any time with no obligation on the part
of Grizzly. Whenever possible, though, we send
manual updates to all owners of a particular tool
or machine. Should you receive one, add the new
information to this manual and keep it for refer-
ence.
We have included some important safety mea-
sures that are essential to the operation of this
machine. While most safety measures are gener-
ally universal, each workshop is different and
safety rules should be considered as they apply
to your specific situation.
We recommend you keep a copy of our current
catalog for complete information regarding war-
ranty and return policy. If you need additional
technical information relating to this machine, or if
you need general assistance or replacement
parts, please contact the Customer Service
Department listed in the introduction.
Additional information sources are necessary to
realize the full potential of this machine. Trade
journals, woodworking magazines, and your local
library are good places to start.
SECTION 8: CLOSURE
Operating this equipment has the potential
for flying debris to cause eye injury. Always
wear safety glasses or goggles when oper-
ating equipment. Everyday glasses or read-
ing glasses only have impact resistant lens-
es, they are not safety glasses. Be certain
the safety glasses you wear meet the appro-
priate standards of the American National
Standards Institute (ANSI).
The Model G5959/9957 was specifically
designed for woodcutting operations. DO
NOT MODIFY AND/OR USE THIS MACHINE
FOR ANY OTHER PURPOSE. Modifications
or improper use of this tool will void the
warranty. If you are confused about any
aspect of this machine, DO NOT use it until
all your questions have been answered.
Serious personal injury may occur.
Like all power tools, there is danger asso-
ciated with the Model G5959/9957.
Accidents are frequently caused by lack of
familiarity or failure to pay attention. Use
this tool with respect and caution to lessen
the possibility of operator injury. If normal
safety precautions are overlooked or
ignored, serious personal injury may
occur.