Filter
Top Products
-8-
Model T10726 (Mfg. Since 12/12)
Cleanup
Workbench Load
Refer to Specifications on Page 3 for the
weight of your machine. Some workbenches may
require additional reinforcement to support both
the machine and materials.
Placement Location
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your new machine. See Figure 2 for the minimum
working clearances.
Site Considerations
Figure 2. Minimum working clearances.
33
1
⁄4
13
1
⁄2
Vise
Brake
The unpainted surfaces of your machine are
coated with a heavy-duty rust preventative that
prevents corrosion during shipment and storage.
This rust preventative works extremely well, but it
will take a little time clean.
Always follow the manufacturer’s instructions with
any cleaning product you use and make sure you
work in a well-ventilated area to minimize expo-
sure to toxic fumes.
Before cleaning, gather the following:
• Disposable Rags
• Cleaner/degreaser (WD•40 works well)
• Safety glasses & disposable gloves
• Plastic paint scraper (optional)
• Hex Wrench 6mm
• Quality metal protectants products like G96
®
Gun Treatment, SLIPIT
®
, or Boeshield
®
T-9
(see Page 13 for offering from Grizzly).
Basic steps for removing rust preventative:
1. Put on safety glasses.
2. Remove the fingers (refer to Page 11 for
detailed instructions).
3. Coat the rust preventative with a liberal
amount of cleaner/degreaser, then let it soak
for 5–10 minutes.
4. Wipe off the surfaces. If your cleaner/
degreaser is effective, the rust preventative
will wipe off easily. If you have a plastic paint
scraper, scrape off as much as you can first,
then wipe off the rest with the rag.
5. Repeat Steps 3–4 as necessary until clean.
6. Apply a thin coat of quality metal protectant
to the fingers and other unpainted metal sur-
faces, then re-install the fingers.
Avoid chlorine-based solvents, such as
acetone or brake parts cleaner, that may
damage painted surfaces.