Filter
Top Products
Model T10726 (Mfg. Since 12/12)
-7-
SECTION 2: SETUP
Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover any damage, please call us immediately
at (570) 546-9663
for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
Unpacking
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine. Discard immediately.
The following are needed to complete the setup
process, but are not included with your machine.
Description Qty
• Cleaner/Degreaser (Page 8) ...... As Needed
• Disposable Shop Rags ............... As Needed
• Sturdy Workbench ...................................... 1
• Vise Secured to Workbench ....................... 1
• Wrench 17mm ............................................ 1
• Hex Wrench 2.5mm .................................... 1
• Hex Wrench 6mm ....................................... 1
Needed for Setup
Inventory
The following is a description of the main compo-
nents shipped with your machine. Lay the compo-
nents out to inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Shipping Inventory: (Figure 1) Qty
A. Brake Assembly ......................................... 1
B. Operating lever w/Set Screw M5-.8 x 8 ...... 1
C. Lever Shaft ................................................. 1
NOTICE
If you cannot find an item on this list, care-
fully check the machine and the packaging
materials. Some of these items may be pre-
installed for shipping or become misplaced
during unpacking.
Figure 1. Shipping inventory.
A
B
C